Create a Test Profile
Create a test profile
A reusable Core Assurance definition of a synthetic test. A test profile sets what to test, what counts as a passing run, when the test runs, which test endpoints run it, and what to do when enough endpoints fail. to start testing a service from your test endpoints
A user device, such as a laptop or desktop computer, that has the Core Assurance module installed and runs synthetic tests. Each test endpoint receives test profiles from the cloud, runs them on schedule, and sends its results back.. You set up the test profile on six tabs, from the test target to the action Core Assurance takes when the test fails. For a description of every field, see Test profile tabs.
Navigate to the Test Profiles page:
-
Click Apps in the left menu.
-
Click Apps Library.
-
Click the Core Assurance card.
-
On the Test Profiles card, click Show Test Profiles.
To create a test profile:
-
Click Create Test Profile. The New Test Profile page opens.
-
On the Basic Info tab, name the profile and choose the test type. See Basic Info tab.
-
On the Definition tab, enter the target and the test settings. See Definition tab.
-
On the Pass Criteria tab, set the conditions a run must meet to pass. See Pass Criteria tab.
-
On the Frequency tab, set when the test runs. See Frequency tab.
-
On the Deployment tab, select the endpoints that run the test. See Deployment tab.
-
Selecting endpoints on the Deployment tab is optional. You can also deploy the profile later from the Test Endpoints page. See Deploy or Undeploy a Test Profile.
-
-
On the Action Policy tab, set the trigger, the dampening period, and the actions. See Action Policy tab.
-
Click Save. Core Assurance saves the profile and starts to sync the profile to the assigned endpoints.
-
To leave without saving, click Cancel or Back to Test Profiles.
-
The new profile appears on the Test Profiles page with a Pending Sync
A sync status that means a test profile deployment is saved in the cloud, but one or more assigned endpoints have not yet applied and confirmed it. label until every assigned endpoint confirms the configuration. See Sync statuses.