Test Endpoints
A test endpoint
A user device, such as a laptop or desktop computer, that has the Core Assurance module installed and runs synthetic tests. Each test endpoint receives test profiles from the cloud, runs them on schedule, and sends its results back. is a user device that has the Core Assurance module installed and can run tests. Test endpoints are where every Core Assurance test actually runs, so the results reflect what your users experience from their own locations. An endpoint appears in Core Assurance automatically after its module reports to the cloud. See Prepare Test Endpoints.
Online and offline endpoints
Each endpoint sends a regular heartbeat
A periodic message that a device or endpoint sends to show that it is online and connected. to show that the endpoint is online. An endpoint that stops sending heartbeats, for example because the device is turned off or asleep, shows as offline. Offline endpoints are not counted when Core Assurance calculates the failure percentage for a test profile, and scheduled runs that an offline endpoint misses are not run later. See Core Assurance Operational Notes and Limits.
How endpoints receive test profiles
An endpoint runs only the test profiles
A reusable Core Assurance definition of a synthetic test. A test profile sets what to test, what counts as a passing run, when the test runs, which test endpoints run it, and what to do when enough endpoints fail. that are assigned to the endpoint. You can assign test profiles in three places:
-
On the Deployment tab, when you create or edit a test profile. Use the Deployment tab to choose the endpoints for one profile. See Create a Test Profile.
-
On the Test Endpoints page, with Deploy Test Profile. Use Deploy Test Profile to add one profile to many endpoints, or remove the profile from many endpoints, in a single action. See Deploy or Undeploy a Test Profile.
-
On the Test Profiles page for one endpoint, with Assign Test and Unassign Test. Use Assign Test and Unassign Test to change the profiles on a single endpoint. See Assign or Unassign Test Profiles on an Endpoint.
Sync statuses
Each time you deploy, undeploy, or change a test profile, Core Assurance sends a new configuration to the affected endpoints. The sync status shows whether an endpoint has applied the new configuration:
-
In Sync: The endpoint has confirmed its latest configuration and runs the test profiles currently assigned to the endpoint.
-
Pending Sync
A sync status that means a test profile deployment is saved in the cloud, but one or more assigned endpoints have not yet applied and confirmed it.: The endpoint has not yet confirmed a configuration change. Online endpoints usually confirm quickly. Offline endpoints confirm when they come back online. -
Out of Sync: The endpoint reported an error when the endpoint tried to apply its configuration. Until the error is resolved, the endpoint might not run the test profiles assigned to the endpoint.
If an endpoint stays Out of Sync, confirm that the endpoint is online, then deploy the affected test profile to the endpoint again. If the status does not change, contact Riverbed Technology Support.
Work with test endpoints
-
Test Endpoints Page: The health of your endpoint fleet, with search, filters, and the endpoint list.
-
Deploy or Undeploy a Test Profile: Add a profile to many endpoints, or remove a profile from many endpoints, at once.
-
Endpoint Test Profiles Page: How each test profile performs on one endpoint.
-
Assign or Unassign Test Profiles on an Endpoint: Change the profiles on a single endpoint.