Traceroute Tests
Traceroute tests
You set the following fields on the Definition and Pass Criteria tabs of a test profile. For how the tabs work, see Definition tab and Pass Criteria tab.
Definition fields
-
Target Host (required): The host name or IP address at the end of the path, for example
example.com. -
Target TCP Port: Traceroute TCP only. The port the probes are sent to. The default is 443.
-
Max Hops: The largest number of hops the test probes before it stops. The default is 20.
-
Path Timeout (ms): The longest time the whole traceroute can take before the run fails. The default is 60000 milliseconds (one minute).
-
Tries per Hop: The number of probes sent to each hop. The default is three.
-
Hop Timeout (ms): How long the test waits for a reply from each hop before it treats the hop as silent. The default is 3000 milliseconds.
-
Hop Gap Limit: The number of silent hops in a row that the test accepts before it stops. The default is eight. Some routers do not reply to probes, so a small number of silent hops is normal.
Pass criteria
-
Requires Target Reached: Select Yes to fail the run when the probes do not reach the target. Select No to judge the run only on the path. The default is Yes.
-
Expected Status: Traceroute TCP only. The connection result a passing run must get from the target port: Connection Accepted (the default), Connection Refused, or Connection Timed Out.
-
Min Number of Responding Hops: The fewest hops that must reply for the run to pass. The default is five.
-
Required Hops (IP): Optional IP addresses of hops that must appear on the path, for example a specific gateway. Separate multiple addresses with commas.
-
Max Response Time (ms): The longest end-to-end round-trip time to the target that a passing run can have.
For the failure codes a traceroute test can return, see Traceroute failure codes.